DETLOFF Compound plates


DETLOFF Compound plates are compound elements for a long service life under conditions of extreme wear and even at elevated temperatures.

Application Example: linings of mills, ventilators, conveying screws, sliding guides, mixing troughs, concrete pumps, screening machine coatings

Compound plates to prevent abrasive wear consist of semi-finished products or of metallic supports, on which wear-protection layers,1.0 to 20.0 mm thick are connected metallically.

wear-protection-layers:

  -  Nickle-based hard alloys with unique hard materials•HV0.3 hardness = 650 to 800
  -  Nickel-based hard alloys with embedded chromium carbides and special hard
     materials•HV0.3 hardness = 1200 to 1400
  -  Nickel-based hard alloys with embedded tungsten carbides•HV0.3 hardness = 1400 to 2000
  -  Iron-based hard alloys with embedded chromium carbides and special carbides
     HRc 55-70 hardness (depending on the composition of the alloy and the thickness of the layer.

HV 0.3 = Vickers hardness
HRc = Rockwell hardness

Compound plates consist of:
 

Supporting material:		Structural steel, boiler plate, stainless steel Special materials on request
Coating:		All qualities from layers with a thickness from 1.0 mm upward (nickel basis), from 2 mm (based on iron)
Plate size:		Nickel-based hard alloys 600 x 800 mm Iron-based hard alloys depending on the thickness: 600 X 800 mm 800 X 1850 mm to 1850 X 2850 mm, special sizes can be delivered upon request
Blanks:		plasma or water-jet cutting

For more information about  compound plates, please click here...
 

 
Contact us!

We are looking forward to cooperate successfully and are pleased to receive your suggestions and requests.

DETLOFF GmbH
Lindachstr. 18
73098 Rechberghausen

Telephone 07161 - 95 82 - 0
Telefax 07161 - 95 82 - 25